Research Article | Published: 01 December 2004

Influence of FA resin and Linseed oil preservatives on mechanical properties of Heartwood of Eucalyptus camaldulensis Dehnh.

C. Swaminathan, K. Bhavanisanker and Jeff Hann

Indian Journal of Forestry | Volume: 27 | Issue: 4 | Page No. 388-390 | 2004
DOI: https://doi.org/10.54207/bsmps1000-2004-JR961N | Cite this article

Abstract

Eucalyptus camaldulensis Dehnh. called as River Red Gum, is a medium to large hardwood found adjacent to most of the inland rivers of mainland Australia. The durability of the wood is low compared to other hardwoods. There has been an increased interest in treatment of hardwoods with preservatives for wood protection and increasing the life of treated wood. Several studies were conducted on use of preservatives for hardwoods. This study was taken up to find out the influence of Resin and Linseed oil preservative treatments on the wood quality in heartwood of Eucalyptus camaldulensis. Wood samples treated with FA resin had higher values for MOE and MOR, which were 17.5 GPa and 124.7 MPa respectively, compared to Linseed oil treated samples. The results indicated that the uptake of Furfuryl Alcohol (FA) resin was 13.0 l m-3 and that of Linseed oil was 9.7 l m-3. From the study it may be inferred that the mechanical properties of heartwood of Red Gum (Eucalyptus camaldulensis) could be enhanced by FA resin treatment for two hours.

Keywords

Access Options

250/-

Buy Full Access in HTML Format

Instant access to the full article.

References

1. Bootle, K.R. (2000). Wood in Australia. Types, Properties and Uses. McGraw Hill Book Co. Australia. pp. 1-443.

Google Scholar

2. Cooper, P.A.; Ung, Y.T. and Kamden, D.P. (1997). Fixation and Leaching of CCA-treated Maple (Acer rubrum L.), Forest Products Journal, 47(9): 27-32.

Google Scholar

3. Englund, K. and Gardner, D.J. (1993). A study of Chromate-copper-arsenate Preservative Treatment in Selected Appalachian Hardwoods. In: Chromium Containing Waterborne Wood Preservative: Fixation and Environmental Issues. Forest Products Society, Madison, USA. pp. 36-40.

Google Scholar

4. Harrow, K.M. (1952). Impregnation of Pinus radiata on Building Timber with Boric Acid by Diffusion. New Zealand Journal of Science and Technology. 33:471-482.

Google Scholar

5. Holmes, J. (1996). Fixation of Chromate-copper-arsenate Wood Preservative in Australian Hardwoods: A Comparison Three Eucalyptus species. International Research Group on Wood Preservaion Document IRG/WP, 96-30107.

Google Scholar

6. Mack, J.J. (1979). Australian Methods for Mechanically Testing Small Clear Specimen of Timber. CSIRO Australian Division of Building Research Technical Paper (II series). 31: 1-19.

Google Scholar

7. Schneider, M.H. and Omidvar, A. (1997). Effect of Moisture Content and Penetration Direction on the Distribution of Styrene in Red Maple. Forest Products Journal, 47(11/12): 97-101.

Google Scholar

8. Vinden, P. and McQuire, A.J. (1981). Treatability Trials with Alkyl Ammonium Compound Preservatives. Part 1. Lowry Process Trials with Dry Pinus radiata Sawn Timber. International Journal of Wood Preservation, 1(4): 185-195.

Google Scholar

9. Vinden, P. (1982). Treatability Trials with Alkyl Ammonium Compound Preservatives. Part 2. Bethell Process and Alternating Pressure Method Treatment of Partially Seasoned Pinus radiata Sawn Timber. International Journal of Wood Preservation, 2(1): 5-12.

Google Scholar

10. Vinden, P.; Drysdale, J. and Spence, M. (1990). Thickened Boron Treatment. International Research Group on Wood Preservation. IRG/WP/3632.

About this article

How to cite

Swaminathan, C., Bhavanisanker, K. and Hann, J., 2004. Influence of FA resin and Linseed oil preservatives on mechanical properties of Heartwood of Eucalyptus camaldulensis Dehnh.. Indian Journal of Forestry, 27(4), pp.388-390. https://doi.org/10.54207/bsmps1000-2004-JR961N

Publication History

Manuscript Published on 01 December 2004

Share this article

Anyone you share the following link with will be able to read this content: